Cross-Trekker Assemblies - ( Bicycle Walker, Runner, Guide, Porter )
*(Note - Cross-Trekker.com is a new utility and fitness product by OYA-SBA LLC., located in and around Houston TX, USA. This is the hard/soft launch of a useful new product. We are looking to get the word out here and start building supports.
Excuse most things here on website. It is still very rough, raw and under construction.
· Watch system demonstration videos here on website under the COURSE (not linked yet) top section main page.
Reach out to us at crosstrekkerinfo@gmail.com (not linked yet).
Phone: Office (832) 477-8538
These are attachable bicycle assemblies that allow for greatly enhanced options in comfort and control when not in a riding position such as walking, hiking, packing. Interchangeable methods of continuous travel and utility capacity. Carry supplies and gear on the frame of the bicycle when walking or jogging in an extremely lite and controllable manner, etc.
These systems allow for great control of a bicycle with open and free flowing body extensions and positions while walking with a bicycle and controlling from the rear open area. Systems allow for riding as normal but when wanted users can open/activate the system quickly and they are off and walking or even jogging freely with the bicycle out-in front.
Systems are sophisticated, in their simplicity, and usability; Opening many useful advantages.
Systems fit most size and styles of bicycles with a connection to the frame seat post via a clamp. They can be installed or removed from the bicycle seat post clamp in seconds depending on the user’s preference.
Systems are extremely controllable and responsive with the amazingly stable and balanced hand CAM control. Operating in a state of highly usable balanced tension.
These systems unlock great advantage, for our bodies with a bicycle, in ridding and walking comfortable while carrying things, of use or need, in an unusually lite and effective way.
These systems allow for free flowing and unrestricted body movements while traveling in a very narrow space profile, that is fluid. This narrow profile and easily changeable position in body is highly useful to avoid strains and maintain balanced exertions. It also allows others shared access on the same sidewalks, trails, or narrow paths. This effortless ability to change positions and control from either side as well as directly behind the bicycle is very useful.
Carry lots of things on the frame of the bicycle while using the system and bicycle as a narrow-balanced cart. Allowing for alternating and continuous travel with the bicycle in a comfortable and refreshing state.
Turn your future outings into much richer and fuller experiences with the ability to ride places quickly or transition quickly into comfortable walking, hiking, or jogging positions as conditions permit, or demand and environmental settings change.
These systems will vastly open access to what users can do with their bodies and a bicycle. It triples, or much more, a user’s capacity and comfort options.
Don’t leave your bicycle locked up somewhere behind, to recover later; or only ride... Keep going anywhere now, while carrying things off body in a lite way.
Seen as extremely useful for many E bike’s that are heavy and even more difficult to walk with. Flexibility and agility in travel. Expand your horizons.
Be better prepared for the next big storm or catastrophic event with prolonged disruptions to normal infrastructure services. You and your community will be better prepared and more sustainable with these systems in place. Don’t be late…
Made in the USA.
We are offering this first limited number of systems with a full and unlimited 3-year warranty followed with an additional 5 year extended main components guarantee, excluding normal ware/tare, or neglect and abuse, and excluding shipping. We are seeking customers to be participants and pioneers in expanding this knowledge and furthering the development of this new, very useful tool. Because we are wanting to gain more understandings and a continued betterment, we have configured this (Plank-Holders 1st edition) Cross-Trekker assembly purchase with a unique offer to receive our next major, or significantly updated system, produced, with-in the expected next 3-5 years, or sooner, but before 10 years free of charge with the trade in of this original system.
Help put these cross-trekking assemblies into our future (free on foot) travel game!
OYA-SBA llc was founded in 2020 after award of a US Utility Patent and is a sole proprietor company looking to partner and expand this technology forward. We are located around the Houston TX area of the USA.
We are just starting to offer at limited capacity a small number of these new units to interested and eligible customers 18 years or older; who are interested in participating in this new (utility product launch and development offering). The founder is a 55 year Father, Navy & Subsea Diving Veteran with an active interest many peculiar and useful things. He has a unique offer and simple request, believing, there is a vast amount for all to gain here.
Cash, Credit, or other Contributions of Support or Giving to Advance?
Let’s change it up here!
Help Needed & Wanted w/ Employment Opportunities to crosstrekkerinfo@gmail.com (not linked yet)
Phone: Office (832) 477-8538
************ More Specific Product Details & Requirements **************
***See Course videos, also located here on this website under COURSE to see better illustrations and best known practices with demonstrations. (Updating and expanding more as we get going here).
Users should be mature minded.
This is not a toy.
Users should have good balance and coordination for best results. Using these systems will strengthen and improve these areas when done correctly.
Attachable to most circular size bicycle seat posts. A minimum of 2-1/2"” inches of open seat post that projects up higher than the back tire is required to mount the system clamp. Ideally, it’s better to have 3” to 3-1/2” open seat post, or more is great, to keep the existing reflector on the seat post, as it should be on most bikes.
The seat post clamp with bolts and pin weighs approximately 1-lbs. The system itself with protective bag and reflective backpack, weighs approximately 3-1/2 lbs.
Cutting edge and feather-lite aircraft grade aluminum 6061 with other amazingly lite, strong, and durable materials are used to make these systems.
The handle grips on your bicycle is where the control harnesses connect and control the steering via communication with hand cam in rear area. The Para Cord 550 Prusik restrictor loops grip very well and release easily when ready to remove. Handlebar grips should already be securely set and not easily pulled off by hands.
The rigging harness assembly has a secondary failsafe rigging harness built in to double prevent any unintended release potentials. This secondary failsafe harness should be routed over the handlebars in some fashion, to act as anchor point for preventing the possibility of unintended release.
A 6MM Allen wrench is required to mount the clamp. Clamp must be set in alignment with back tire and tightened down firmly in this position. The system ports into this receiver clamp via a quick disconnect bolt.
Very slick coated seat posts such as seen with pneumatic/hydraulic and carbon fiber posts will need to consider different clamping options.
There are entanglement hazards to small children and systems should not be left accessible to them.
There are no known overly harsh or hazardous materials used in the making of these systems, with continued pursuit of the best mediums.
TBC
*(Note - Cross-Trekker.com is a new utility and fitness product by OYA-SBA LLC., located in and around Houston TX, USA. This is the hard/soft launch of a useful new product. We are looking to get the word out here and start building supports.
Excuse most things here on website. It is still very rough, raw and under construction.
· Watch system demonstration videos here on website under the COURSE (not linked yet) top section main page.
Reach out to us at crosstrekkerinfo@gmail.com (not linked yet).
Phone: Office (832) 477-8538
These are attachable bicycle assemblies that allow for greatly enhanced options in comfort and control when not in a riding position such as walking, hiking, packing. Interchangeable methods of continuous travel and utility capacity. Carry supplies and gear on the frame of the bicycle when walking or jogging in an extremely lite and controllable manner, etc.
These systems allow for great control of a bicycle with open and free flowing body extensions and positions while walking with a bicycle and controlling from the rear open area. Systems allow for riding as normal but when wanted users can open/activate the system quickly and they are off and walking or even jogging freely with the bicycle out-in front.
Systems are sophisticated, in their simplicity, and usability; Opening many useful advantages.
Systems fit most size and styles of bicycles with a connection to the frame seat post via a clamp. They can be installed or removed from the bicycle seat post clamp in seconds depending on the user’s preference.
Systems are extremely controllable and responsive with the amazingly stable and balanced hand CAM control. Operating in a state of highly usable balanced tension.
These systems unlock great advantage, for our bodies with a bicycle, in ridding and walking comfortable while carrying things, of use or need, in an unusually lite and effective way.
These systems allow for free flowing and unrestricted body movements while traveling in a very narrow space profile, that is fluid. This narrow profile and easily changeable position in body is highly useful to avoid strains and maintain balanced exertions. It also allows others shared access on the same sidewalks, trails, or narrow paths. This effortless ability to change positions and control from either side as well as directly behind the bicycle is very useful.
Carry lots of things on the frame of the bicycle while using the system and bicycle as a narrow-balanced cart. Allowing for alternating and continuous travel with the bicycle in a comfortable and refreshing state.
Turn your future outings into much richer and fuller experiences with the ability to ride places quickly or transition quickly into comfortable walking, hiking, or jogging positions as conditions permit, or demand and environmental settings change.
These systems will vastly open access to what users can do with their bodies and a bicycle. It triples, or much more, a user’s capacity and comfort options.
Don’t leave your bicycle locked up somewhere behind, to recover later; or only ride... Keep going anywhere now, while carrying things off body in a lite way.
Seen as extremely useful for many E bike’s that are heavy and even more difficult to walk with. Flexibility and agility in travel. Expand your horizons.
Be better prepared for the next big storm or catastrophic event with prolonged disruptions to normal infrastructure services. You and your community will be better prepared and more sustainable with these systems in place. Don’t be late…
Made in the USA.
We are offering this first limited number of systems with a full and unlimited 3-year warranty followed with an additional 5 year extended main components guarantee, excluding normal ware/tare, or neglect and abuse, and excluding shipping. We are seeking customers to be participants and pioneers in expanding this knowledge and furthering the development of this new, very useful tool. Because we are wanting to gain more understandings and a continued betterment, we have configured this (Plank-Holders 1st edition) Cross-Trekker assembly purchase with a unique offer to receive our next major, or significantly updated system, produced, with-in the expected next 3-5 years, or sooner, but before 10 years free of charge with the trade in of this original system.
Help put these cross-trekking assemblies into our future (free on foot) travel game!
OYA-SBA llc was founded in 2020 after award of a US Utility Patent and is a sole proprietor company looking to partner and expand this technology forward. We are located around the Houston TX area of the USA.
We are just starting to offer at limited capacity a small number of these new units to interested and eligible customers 18 years or older; who are interested in participating in this new (utility product launch and development offering). The founder is a 55 year Father, Navy & Subsea Diving Veteran with an active interest many peculiar and useful things. He has a unique offer and simple request, believing, there is a vast amount for all to gain here.
Cash, Credit, or other Contributions of Support or Giving to Advance?
Let’s change it up here!
Help Needed & Wanted w/ Employment Opportunities to crosstrekkerinfo@gmail.com (not linked yet)
Phone: Office (832) 477-8538
************ More Specific Product Details & Requirements **************
***See Course videos, also located here on this website under COURSE to see better illustrations and best known practices with demonstrations. (Updating and expanding more as we get going here).
Users should be mature minded.
This is not a toy.
Users should have good balance and coordination for best results. Using these systems will strengthen and improve these areas when done correctly.
Attachable to most circular size bicycle seat posts. A minimum of 2-1/2"” inches of open seat post that projects up higher than the back tire is required to mount the system clamp. Ideally, it’s better to have 3” to 3-1/2” open seat post, or more is great, to keep the existing reflector on the seat post, as it should be on most bikes.
The seat post clamp with bolts and pin weighs approximately 1-lbs. The system itself with protective bag and reflective backpack, weighs approximately 3-1/2 lbs.
Cutting edge and feather-lite aircraft grade aluminum 6061 with other amazingly lite, strong, and durable materials are used to make these systems.
The handle grips on your bicycle is where the control harnesses connect and control the steering via communication with hand cam in rear area. The Para Cord 550 Prusik restrictor loops grip very well and release easily when ready to remove. Handlebar grips should already be securely set and not easily pulled off by hands.
The rigging harness assembly has a secondary failsafe rigging harness built in to double prevent any unintended release potentials. This secondary failsafe harness should be routed over the handlebars in some fashion, to act as anchor point for preventing the possibility of unintended release.
A 6MM Allen wrench is required to mount the clamp. Clamp must be set in alignment with back tire and tightened down firmly in this position. The system ports into this receiver clamp via a quick disconnect bolt.
Very slick coated seat posts such as seen with pneumatic/hydraulic and carbon fiber posts will need to consider different clamping options.
There are entanglement hazards to small children and systems should not be left accessible to them.
There are no known overly harsh or hazardous materials used in the making of these systems, with continued pursuit of the best mediums.
TBC